Battery
Regeneration

3REWorks uses state of the art, patented equipment and techniques to reverse many common problems experienced with lead acid and other types of batteries.

The 3RE technology is able to solve the address the sulfation process in the battery and allowing the battery to regain most of its lost capacity. Through our own developed regeneration technology, we are able to reverse the crystallization in the battery and bring the battery back to life.

Better still, our advanced technology is able to restore a battery’s ability to hold a full charge, extending its useful life by as much as 3 years at a much lower cost than would be incurred by replacing the battery.

Every battery is regenerated separately, and there is no loss of regeneration power due to bad cells. We adjust our settings for batteries of different types and in different conditions.

Past experience has shown that we are able to successfully regenerate between 55% and 70% of the batteries brought to our centres, depending on their condition.

3RE GENERATIONTECHNIQUES

1Batteries lose capacity due to crystallization of the sulfite from the electrolyte
23RE regenerators are able to reverse the crystallization process through pulse technology
3Batteries are not opened, and only distilled water is added.
4Regeneration may be attempted twice, and is considered successful once the battery achieves 85% or more of its original capacity.
5All successfully regenerated batteries will be tested in 3 C3 charge-discharge cycles.
6Should the battery show a capacity below 85% within these 3 cycles, the regeneration is not considered successful.
7After finishing the whole process, all successful batteries will be charged, cleaned and labelled with 3RE branding. The batteries are now ‘as good as new’.
8Entry date, delivery date, voltage, amperage, IR and capacity are recorded o each battery.

THE steps per

Regeneration are as follows

01Recording battery brand, type and barcode at entry
02Entry test, which determines the charge capacity of the battery
03Regeneration of the battery
04Discharging test (C3 test) to determine the capacity after regeneration
05Passing the C3 test indicates successful regeneration
06One out of every 10 regenerated batteries is selected for a full C10 test
07Labelling, cleaning and packaging of the batteries
08Batteries delivered weekly to the warehouse of operator with entry and exit records
09All batteries will be returned to the operator
10Invoices for successfully regenerated batteries are issued periodically in USD

The Advantages of Battery

REGENERATION

  • Battery regeneration helps the environment directly.
  • No lead, acid or other chemicals are spilled, dumped or disposed of during the regeneration process.
  • No hazardous materials are used during regeneration.
  • Longer use of batteries lowers their overall environmental impact.
  • Regeneration lowers the user’s CO2 footprint by 32 litres per battery.
  • All materials are disposed of through certified recycling companies

What Types of Battery We Can Regenerate

  • Gel Batteries
  • 2V, 6V and 12V batteries
  • AGM batteries
  • UPS stand by batteries
  • OPzV batteries
  • Traction batteries
  • Ni Cad batteries
  • NiMH batteries